| Gunsmithing – Revolver Work
Note: prices below are subject to change
|
|
|
|
BARRELS AND SIGHTS
|
|
| Douglas Premium Bull Barrel (Round) |
$175.00 |
| Douglas Premium Bull Barrel (Slab) |
$265.00 |
| Crane Lock (Required with Bull Barrel) |
$40.00 |
| Action Port® (Your Barrel) |
$100.00 |
| Remove Barrel and Set Back One Full Turn |
$90.00 |
| Re-cut Forcing Cone |
$40.00 |
| Remove Barrel and Re-Crown (Re-Install Barrel) |
$75.00 |
| Install Rear Factory S&W Blade (Labor Only) |
$10.00 |
| Install Bo-Mar Rib (Labor Only) |
$50.00 |
| Cut Bo-Mar Rib for Scope Mount |
$85.00 |
| Custom Dovetail Front Sight |
$80.00 |
| Drill and Tap for Factory Scope Pattern |
$30.00 |
| Install Under Lugs (Labor Only) |
$45.00 |
CYLINDER
|
|
| Re-Time Cylinder |
$75.00 |
| Head Space Cylinder (Labor Only) |
$30.00 |
| Reset Cylinder Gap (Labor Only) |
$30.00 |
| Straighten Yoke |
$30.00 |
| Chamfer Cylinder Holes – 38 Special (6-shot) |
$45.00 |
| Chamfer Cylinder Holes – Hog Job (45 acp Only) |
$75.00 |
| Cut Cylinder for Use with Moon Clips |
$95.00 |
| HAMMER AND TRIGGER |
|
| Trigger Stop (Screw through Trigger) |
$40.00 |
| Deluxe Trigger Stop (Soldered in Back of Trigger) |
$60.00 |
| Polish and Round Trigger |
$35.00 |
| Thin Trigger (Target Trigger $5.00 Extra) |
$10.00 |
| Bob Hammer and Polish |
$35.00 |
| Internal Trigger Stop (Carry Gun) |
$45.00 |
| ACTION WORK |
|
| Standard Action Job J, K, L, and N Frame (Labor Only) |
$80.00 |
| Double Action Only (Labor Only) $120.00 |
$120.00 |
| Complete Action Job – Includes lapping the cylinder to the recoil shield, correcting headspace and cylinder gap, moving barrel back one turn if needed, recutting forcing cone, re-crown barrel, and correct timing. (Labor Only) |
$299.00 |
FINISHES AND FRAME
|
|
| Blue Entire Gun (Luster or Matte) |
$125.00 |
| Blue Entire Gun – Hand Polish (Master Finish) |
$160.00 |
| Hard Crome Entire Gun |
$150.00 |
| Blend Hammer and Trigger to Match Gun |
$45.00 |
| N – Frame Grip Re-cut to K – Frame |
$175.00 |
| Re-Cut Serrations on Backstrap |
$75.00 |
| Hand Checker Back Strap |
$150.00 |
| Complete Disassembly (Inspection and Cleaning) |
$40.00 |
| Test Fire and Range Time (Required with Action Job) |
$40.00 |
REVOLVER PACKAGES
|
|
PPC COMPETITION (On Your Gun)
Bull Barrel, Bo-Mar Rib, Crane Lock, Action Job, Trigger Stop, Bob Hammer & Polish, Round Trigger & Polish, Straighten Yoke, Set Cylinder Gap, Head Space Cylinder, Re-Blue Entire Gun, Test Fire & Sight In, and Return Shipping, Handling & Insurance.
(3-8 weeks) |
$745.00 |
7 & 8 SHOT PIN GUN (On Your Gun)
Action Port® Barrel, Action job, Deluxe Trigger Stop, Bob Hammer, Polish & Round Trigger, Refinish Hammer & Trigger to Match Gun, Test Firing & Sight In, and Return Shipping, Handling and Insurance.
(3-8 weeks) |
$395.00 |
|
WORK ACCEPTED ONLY ON UNALTERED SMITH & WESSON REVOLVERS
Prices subject to change without notice.
50% deposit required to accept job.
Balance due on completion.
All P.P.C. Revolvers guaranteed x-ring accuracy.
Personal checks – Minimum 2 weeks to clear.
All prices quoted reflect a 4% discount for paying cash or check.
|
|