Made of Delrin, this is the Tool for not mark up your receiver.
Clamp the Flipper into your vise and it holds any AR-15/M16, AR10 Lower receiver for assembly purposes. When finished, simply loosen the vise, flip "The Flipper" over and it will hold or retain any AR15/M16, AR-10 Upper receiver for assembly purposes.
Replaces barrel vice and totally secures and protects receiver during removal and replacement of barrel assembly. Totally eliminates any possibility of damage to barrel detent pin or receiver detent notch. Fits all model Mil. Spec. receivers and is made of high pressure structural vinyl foam. Torque tested to over 200 ft. lbs.! Patent Pending.
This tool simply inserts into the magazine housing on the lower receiver, giving you the leverage needed to compress the delta ring assembly. This compression allows the Handguards to be easily removed as well as giving you easy access to the gas tube. Works with the A-15/EM-16, AP4 or Car-15 rifle.
The HEAD SPACE GAUGE is designed to protect your firearms from unnecessary damage and you, the shooter, from possible injury by showing whether or not the "head space" of an action is within tolerance. Essentially, head space is the distance between the face of the breech and the base of the cartridge when the action is closed. Accuracy and safety is threatened when there is excessive head space.
Forster Head Space Gauges are made with painstaking care to insure you accurate testing of the chamber. Each caliber Gauge comes in "GO", "NO GO", and "FIELD". If an action will not accept a "GO" Gauge, it will not accept cartridge cases of maximum length. If it accepts a "NO GO" Gauge the action may have excessive head space. If the action accepts a "FIELD" Gauge, it should not be fired. Every firearms owner should have Forster Head Space Gauges for safety and accuracy.
Specify "GO", "NO GO" or "FIELD" length gauge when ordering.
Quick and easy cleaning of your mags, works for AK and other mags. Dirt and damage to magazines are the main reason for weapon failure. Keep them clean for longer life.
NEW!---This cleaning kit contains 6 precision fit brushes. The brushes clean the Upper Receiver, Chamber, Bolt Carrier, .223 bore(AR-15),or .30 bore(AR.308), Bolt Carrier Key Tube, and the Gas Tube. The Gas tube brush cleans the entire length of the gas tube without disassembly of the upper receiver. The kit also includes the Eliminator Cleaning Tool & Rod. This cleaning tool is handy for tight cleaning jobs where a regular rod is too long and cumbersome to use. This short sturdy tool is useful with any Eliminator Brush to clean pistol bores, chambers, revolver cylinders, case cleaning, neck turning, etc. Use it with the Bolt Carrier Key Brush, Bolt Carrier Brush and as a handle to attach the Eliminator Bore Cleaning Rope (also included).When the extension rod is attached, it is stationary and will not spin. Use it with the Upper Receiver Brush and Chamber Brush. It may also be used for any job that requires a longer handle.
