Aimpoint Scopes

Aimpoint Patrol Rifle Optic now available to the General Pubic.

GENERAL DATA

Technology ACET (Advanced Circuit Efficiency Technology)

Working principle Reflex collimator sight - red dot sight

OPTICAL DATA

Light source LED (Light Emitting Diode) totally eye-safe

Red dot size in MOA (2 minute of angle)

Parallax Absence of parallax-No centering required

Eye relief Unlimited

Night vision compatibility Yes

Anti-reflex coating all surfaces &multi-layer coating objective lens-Yes

Magnification No magnification (1X)

ELECTRONIC DATA

Battery One 3V Lithium battery, type 2L76 or DL1/3N

Battery life in hours 30 000 (over 3 years of continuous use)

Dot intensity adjustment Manual rotary switch

Daylight (DL) settings 6 DL of which one extra bright

NVD settings 4 NVD

MECHANICAL DATA

Material housing High strength aluminum

Surface finish Hard anodized, matte

Color housing Black

Adjustment 1 click 13mm at 100m, (1/2'' at 100yds)

Mounting methods

QRP2 mount for M1913 Picatinny rail, and spacer for Co-witness Iron Sights

ENVIROMENTAL DATA

Temperature range -45 - +71 C, (50- +160 F)

Water resistance - submersible to 45m, (150ft)

DIMENSIONS

Length 130mm, (5.1'')

Width/height sight only 55 x 55mm, (2.2'' x 2.2'')

Maximum ring width 30mm, (1.18'')

Objective diameter 38mm, (1.5'')

Tube diameter 30mm, (1.18'')

Weight sight only 220g, (7.8oz)

Weight sight with integrated mount 11.6 oz

Includes Mount and Spacer

The Aimpoint® Carbine Optic is designed specifically for use on AR-15 and M4 carbine style rifles, incorporating proven design features and premium Aimpoint quality at an entry level price point. This new sight was developed with the modern sporting rifle owner in mind, and the ACO is ready to mount and shoot directly out of the box. A full selection of branded accessories, are available from Aimpoint dealers, allowing users to customize their sight to fit their specific requirements. The ACO pairs a 30mm aluminum alloy sight tube with an extremely rugged fixed height mount designed to provide absolute co-witness with AR-15 backup iron sights. A two minute of angle (2 MOA) red dot is utilized to allow maximum target acquisition speed and accuracy at all distances. The ACO is completely waterproof, and offers one year of constant-on use from a single 1/3N battery.

Up to 1 year of constant-on use on a single DL1/3N battery

Completely waterproof

2 Minute of Angle(2 MOA) red dot

Designed specifically for modern sporting rifles

Ready to mount directly out of the box

Fixed height mount included - providing absolute co-witness with AR-15 backup iron sights

Legendary Aimpoint quality and ruggedness at an entry level price point

Advanced optical lenses for even better light transmission

Front Flip-up lens cover is included

Transparent rear Flip-up lens cover is included

Reinforced protection of the turrets for even greater ruggedness

Ideal for rifles, carbines, shotguns, submachine guns, and handguns

Weight 3.7 oz. (105g) including mount, sight only 3.0 oz. (84g)

1X (non-magnifying) parallax free optic

Compatible with all generations of Night Vision Devices (NVD)

1 Off position, 4 night vision compatible settings and 8 daylight settings

Integral Picatinny-style base allows easy attachment to any rail

ACET technology allows 50,000 hours (over 5 years) of constant operation with one battery

Available in 2 MOA dot size

Hard anodized non-reflective finish

Submersible to 80 feet (25 meters)

The tactical member of the Micro family is compatible with all generations of night vision devices. Submersible to 80 feet.

Ideal for rifles, carbines, shotguns, handguns and sub-machineguns.

Integral Picatinny style base allows easy attachment to any rail.

6 night vision compatible settings and 7 daylight settings and one extra bright setting for use with laser protection.

ACET technology allows 50,000 hours of operation on one battery.

Available only in the 4 M.O.A. Dot size.

3.7 OZ's with mount

2.4" Long x 1.6" Width x 2.4" Height

Designed with the hunter in mind, these sights are the lightest red dot sights tough enough to bear the Aimpoint name. Small enough to be used anywhere that you could put iron sights, these sights can be used on any type of firearm or archery equipment. A lightweight Rifle with the Micro H-1 mounted on it remains a lightweight rifle.

ACET technology allows 50,000 hours of operation on one battery.

Available in the 4 MOA (minutes of angle) Dot size

Submersible to 15 feet of water, 1X (non-magnifying) parallaz free optic.

Patent pending mount is keyed to the sight body to absorb recoil.

Precision adjustments for windage and elevation.

13 settings for use in daylight and lowlight conditions.

2.4" Long x 1.6" Width x 2.4" Height

3.7 OZ'S Including the mount

The performance of the Comp M4 series of sights is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint's unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, the CompM4 and CompM4s are ready for use around the clock.

Compatible with every generation of Night Vision Devices (NVD).

7 night vision compatible settings and 9 daylight settings.

Improved rotary switch will not suffer damage under normal use.

QRP2 mont has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear.

Mount base is "keyed" into the body of the sight to absorb recoil. Mount base screws directly into the sight. No sight ring is required.

2 MOA dot for close combat and long distance engagement. Matches perfectly with Aimpoint 3X magnifer.

Front lens is threaded for Kill Flash and is Submersable to 150 feet.

Vertical spacer included, along with inproved adjustment caps.

Standardized as the US Army's new M68 CCO.

Can be used with a carry handle adaptor for use on all M16 rifles.

The Aimpoint Comp M4 series of sights are the finest sights that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery!

The Comp M4 sights incorporate an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems.

They can also be used by hunters and sport shooters that need night vision compatibility.

The Comp M4 series of sights are available in two versions:

The CompM4 offers a high battery compartment, while the CompM4-S offers a low battery compartment.

In all other aspects, the Aimpoint CompM4 and Aimpoint CompM4-S are identical.

Designed especially for the Aimpoint sights. Can be used as a handheld monocular or weapons mount. When used with the Twist Mount ( sold separately) this devise can be quickly and easily installed and removed.

No need to re-zero and does not affect the point of impact.

The 9000SC is a medium length sight that can be use for the following applications.

Rifles, Shotguns and Heavy Recoiling Handguns

Available in 2 MOA and 4 MOA Dots

New ACET technology allow for up to 50,000 hours of operation on one battery. Submersible to 15 feet on water.

Select Dot size below