|
|
|
Magpul Precision Rifle Stock
Mounts on mil-spec rifle length receiver extension tube
Machined aluminum adjustment dials with positive click detent's
Corrosion resistant stainless steel shafts
Integrated bottom Picatinny rail for use with mono-pod
Reversible 1.25” loop front and rear sling mounts
Adjustable Check Piece and Butt Pad
Available in 223/556 or .308 Models
Black Only
Select Below
|
|
|
|
|
|
|
Pardus Carbine Stock
Make your shooting experience more enjoyable with the addition of an innovative new buttstock design from DPMS! Made of a space age, lightweight, fiber reinforced Zytel.
Four Integrated slots for sling attachment
Works with both 6-position standard and Mil-Spec Tubes
Ergonomic latch
Curved Saw-Tooth buttplate
Monte Carlo-Style Cheek rest
Reinforced Latch Pin
BLACK ONLY
COMES WITH BUFFER AND SPRING!
|
|
|
|
|
|
|
M4 Carbine Stock Assembly
M4 Carbine Stock Assembly. (Includes Buffer and Spring)
|
|
|
|
|
|
|
Socom M4 Stock
This is the strongest production AR15/M16 stock available! Approximately 6 times stronger than an A-15 A2 stock & receiver extension tube. Ideal for CQB or breaching doors, and without the fear of bending the receiver extension tube (which disables the rifle). Adjustable length of pull, adjusts from 7.5" to 9.5" in five 1/2" increments. The AP4 SOCOM comes with extra hardware so that it can be set up as a push button quick adjustable stock for "pre-ban" or "exempt" use; or as an adjustable stock for post ban use! (AP4 SOCOM has not been approved by the BATF for post ban use). Closed-cell foam overtube provides an extremely comfortable cheek weld. This stock mounts "rock solid' to the rifle with no movement making it an ideal stock for precision shooting as well. Ambi-sling mount / gusset reinforces the receiver extension tube at its weakest point- just behind the receiver. Four 1.5" totally quiet and fail safe machined in sling-slots allows optimum sling mount flexibility. With the 1.0" pad it is also ideal for use with .50 BMG AR uppers. Comes with .5" recoil pads. Uses carbine length buffer and spring (not included).
L.O.P. fully collapsed 11.0 " and fully extended 13.0" without recoil pad.
Weight: 460g (16.5 oz)
|
|
|
|
|
|
|
Ace Enty and Standard Length Buttstock
The AR15 Skeleton Stock - ARFX. The ARFX is 3.6 oz lighter than the A2 stock, while still retaining high strength and durability. A closed-cell foam "overtube" provides a super comfortable cheek weld, and it insulates the shooter's face from vibration and temperature extremes. The ARFX also sports three sling positions: right and left behind the receiver and one at the toe of the butt. Uses a standard A1/A2 receiver extension tube, buffer and spring ( not included ). Includes .5" thick rubber "over-mold" recoil pad. Can be installed on " Post Ban" rifles.
Entry Stock ARFX Listed below
ARFX Entry stock. This stock is only 7.25" long without recoil pad; yet is strong enough for its intended purpose "Close Quarters Battle." CQB usually involves heavy armor and the need for a stock that can be used to breech light doors or in hand to hand combat. Uses CAR length buffer and spring (not included). Special receiver extension tube, Sling swivel, foam overtube and choice of .5" or 1.0" recoil pad are included.
Length 7.25". L.O.P.=10.45" (without recoil pad ) Weight: 265g ( 9.7 oz)
Select Stock Length
|
|
|
|
|
|
|
Complete A2 Buttstock
Buttstock Assembly features the Aluminum Door Assembly w/plate, the tube, spacer, buffer, and buffer spring plus upper & lower screws
|
|
|
|
|
|
|
A2 Buttstock
A2 Buttstock Assembly (Buttstock W/Plate & Door Assembly Only)
|
|
|
|
|
|
|
A2 Buttstock W/Engraved DPMS Logo
A2 Buttstock W/Engraved DPMS Logo (Buttstock Only)
|
|
|
|
|
|
|
Skeletonized Buttstock
Stock, Door Assembly, Rear Swivel, and Lower Screw
|
|
|
|
|
|
|
Skeletonized Buttstock Complete
Buttstock with: Buttstock Extension Tube, Spacer, Buffer, Spring, Aluminum Door Assembly, Swivel and Both Upper and Bottom Screws
|
|
|
|
|
|
|
Adjustable Buttstock
Increase your accuracy by custom adjusting this new stock assembly to fit your rifle to your size. Adjustment for length of pull and vertical adjustment for buttplate. Price includes the buttstock, adjustable buttplate assembly, rear swivel and lower screw.
Does not include tube and spacer.
Standard A2 Buttstock 10-1/2" Long
Adjustable Buttstock 11-1/8" to 12-1/2"
|
|
|
|
|
|
|
Buttstock Extender
Buttstock Extender Add 1'' To Overall Length.
|
|
|
|
|
|
|
SPR Adjustable Buttplate
Length of pull can be increased by up to 4" and almost 3" of vertical cant for proper cheek weld.
|
|
|
|
|
|
|
Carbine Recoil Pad
Rubber extended recoil pad for carbine stocks. Ribbed back for greater comfort while shooting.
Will not fit the AP4 (M4 style) Stock
|
|
|
|
|
|
|
AP4 (M4 Style) Recoil Pad
Rubber recoil pad fits the AP4 (M4 style) buttstock. Soft rubber for added comfort and extra length of about 1/2".
|
|
|
|
