| |
|
Aimpoint Micro T-1
The tactical member of the Micro family is compatible with all generations of night vision devices. Submersible to 80 feet.
Ideal for rifles, carbines, shotguns, handguns and sub-machineguns.
Integral Picatinny style base allows easy attachment to any rail.
6 night vision compatible settings and 7 daylight settings and one extra bright setting for use with laser protection.
ACET technology allows 50,000 hours of operation on one battery.
Available only in the 4 M.O.A. Dot size.
3.7 OZ's with mount
2.4" Long x 1.6" Width x 2.4" Height
|
|
|
|
| |
|
Aimpoint Micro R-1
This member of the Micro family of sights is designed and built with the competetive handgunner in mind. With is's Silver Metallic Finish, the Micro R-1 is perfect on pistols and revolvers for and type of competition.
ACET technology allows 50,000 hours of operation on one battery.
Available in the 4 MOA (minutes of angle) Dot size
Submersible to 15 feet of water, 1X (non-magnifying) parallaz free optic.
Patent pending mount is keyed to the sight body to absorb recoil. Precision adjustments for windage and elevation.
13 settings for use in daylight and lowlight conditions.
2.4" Long x 1.6" Width x 2.4" Height
3.7 OZ'S Including the mount
|
|
|
|
| |
|
Aimpoint Micro H-1
Designed with the hunter in mind, these sights are the lightest red dot sights tough enough to bear the Aimpoint name. Small enough to be used anywhere that you could put iron sights, these sights can be used on any type of firearm or archery equipment. A lightweight rilfe with the Micro H-1 mounted on it remains a lightweight rifle.
ACET technology allows 50,000 hours of operation on one battery.
Available in the 4 MOA (minutes of angle) Dot size
Submersible to 15 feet of water, 1X (non-magnifying) parallaz free optic.
Patent pending mount is keyed to the sight body to absorb recoil. Precision adjustments for windage and elevation.
13 settings for use in daylight and lowlight conditions.
2.4" Long x 1.6" Width x 2.4" Height
3.7 OZ'S Including the mount
|
|
|
|
| |
|
Aimpoint CompM4
The performance of the CompM4 series of sights is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint's unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, the CompM4 and CompM4s are ready for use around the clock.
Compatible with every generation of Night Vision Devices (NVD).
7 night vision compatible settings and 9 daylight settings.
Improved rotary switch will not suffer damage under normal use.
QRP2 mont has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear.
Mount base is "keyed" into the body of the sight to absorb recoil. Mount base screws directly into the sight. No seperate sight ring is required.
2 MOA dot for close combat and long distance engagement. Matches perfectly with Aimpoint 3X magnifer.
Front lens is threaded for KillFlash and is Submersable to 150 feet.
Vertical spacer included, along with inproved adjustment caps.
Standardized as the US Army's new M68 CCO.
Can be used with a carry handle adaptor for use on all M16 rifles.
|
|
|
|
| |
|
Aimpoint CompM4-S
The Aimpoint CompM4 series of sights are the finest sights that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery!
The CompM4 sights incorporate an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems.
They can also be used by hunters and sport shooters that need night vision compatibility.
The CompM4 series of sights are available in two versions:
The CompM4 offers a high battery compartment, while the CompM4-S offers a low battery compartment.
In all other aspects, the Aimpoint CompM4 and Aimpoint CompM4-S are identical.
|
|
|
|
| |
|
3X Magnifyer
Designed especially for the Aimpoint sights. Can be used as a handheld monocular or weapons mount. When used with the Twist Mount ( sold seperatly) this devise can be quickly and easily installed and removed.
No need to re-zero and does not affect the point of impact.
|
|
|
|
| |
|
Aimpoint CompC3
Specifically designed to use whenever you need a compact sight. The CompC3 sight is the lightest sight in its class. Ideal for Scout Rifles, Bows Carbines or Handguns. Easy to mount with the 30mm Ring Supplied. Fits Weaver type Mounts.
New ACET tecnology allows 50,000 hours of operation on one battery.
Submersible to 15 feet of water.
Select: 2 MOA or 4 MOA Dot size
|
|
|
|
| |
|
Aimpoint Camo Scope
The 9000SC, Camo ( Realtree Hardwoods Green ) 4 MOA is a medium length sight that is primarily designed to be used with semi-automatic shotguns and rifles. It also works perfectly when put on any heavy recoiling handgun like the new Smith & Wesson 500. New ACET technology allows 50,000 hours of operation on one battery. 2 each 30mm Camo rings are included in the price that will mount on any Weaver Rail. Killflash shown is not included.
|
|
|
|
| |
|
Aimpoint 9000SC
The 9000SC is a medium length sight that can be use for the following applications.
Rifles, Shotguns and Heavy Recoiling Handguns
Available in 2 MOA and 4 MOA Dots
New ACET technology allow for up to 50,000 hours of operation on one battery. Submersible to 15 feet on water.
Select Dot size below
|
|
|
|
| |
|
Aimpoint CompML2
No Ring Supplied. Includes Pop Up Caps. Heavy-duty variants of the CompC built for extreme conditions. This sight has a special hard-anodized surface and the specification for water tightness is equivalent to a depth of 75 feet. The high quality requirements are designed to cope with frequent professional use on those types of guns that are typically used by the police and the military or for hunting under extreme conditions.
|
|
|
|
| |
|
Aimpoint CompM2
No Ring Supplied. Pop Up Caps Included. The CompM2 is compatible with all generations night vision devices but is otherwise identical in construction to the CompML2. At the lowest brightness setting (for night-time use with NVD) there is no need for an off position on the switch. No sight on the market can rival the light transmission through an Aimpoint sight in both the visible and IR ranges/spectra. This becomes especially obvious in dim conditions. The CompM2 has 4 NVD settings to give an extremely clear reticle in dark conditions.
|
|
|
|
| |
|
Aimpoint CompM3
The Aimpoint CompM3 comes with a replaceable, outer black rubber cover, which protects the outside body from scratches. Featuring the new Advanced Circuit Efficiency Technology (ACET). 50,000 hours on one battery. Works with any Night Vision Device. Pop Up Caps are also provided.
500,000 hours hours of use on NVD setting and Submersible to 135 Feet of Water.
Mounting Rings are available in different configurations as an option.
Select: 2 MOA or 4 MOA Dot size
|
|
|
|
| |
|
Aimpoint CompML3
Designed for daylight and lowlight conditions. The Aimpoint CompML3 comes with a replaceable, outer black rubber cover, which protects the outside body from scratches. Featuring the new Advanced Circuit Efficiency Technology (ACET). 50,000 hours on one battery. Pop Up Caps are also provided.
Mounting Rings are available in different configurations as an option.
Select: 2 MOA or 4 MOA Dot size
Shown with Optional Tan cover (Black Supplied)
|
|
|
|
| |
|
Aimpoint ML2 & Tactical Lever Mount
Aimpoint ML2 with the Al's Custom Tactical Multi-Mount System.(Patent Pending)
Fits Scopes and Electronic Dot Systems
Easy ON/OFF Locking Lever with Repeat Zero
30MM Ring with an Optional 1" Ring Insert
Mil-Spec Finish
Handguns and Long Guns
Fits Picatinny or Weaver Rails (Both Recoils Lugs Included)
Tension Adjustable for Rail Width
Build in Height for Co-Witness of Iron Sights
Also works on Trijicon Reflex Sight and many other brands of Tactical 1x5 Short Range Scopes
|
|
|
|
| |
|
Aimpoint Package Deal #1, 2, and 3
Deal # 1 Aimpoint # 10338 ML2 with Arms #22M68 Lever Ring Mount.
Deal # 2 Aimpoint # 11405 ML3, 4 MOA with Arms #22M68 Lever Ring Mount.
Deal # 3 Aimpoint # 11416 ML3, 2 MOA with Arms #22M68 Lever Ring Mount.
All three models are supplied with Pop Up caps. The New ML3's also include a black outter rubber cover to protect the scope from scratching.
Select Package Below
|
|
|
|
| |
|
Aimpoint Package Deal #4, 5 and 6
Deal # 4 Aimpoint # 10336 M2 with Arms #22M68 Lever Ring Mount.
Deal # 5 Aimpoint # 11403 M3, 4 MOA with Arms #22M68 Lever Ring Mount.
Deal # 6 Aimpoint # 11408 M3, 2 MOA with Arms #22M68 Lever Ring Mount.
All three models are supplied with Pop Up caps. The New M3's also include a black outter rubber cover to protect the scope from scratching.
Select Package Below
|
|
|
|
| |
|
Aimpoint Package Deal 7, 8, and 9
Deal # 7 Aimpoint # 10338 ML2, Arms #22M68 Lever Ring, and Cantilever Spacer
Deal # 8 Aimpoint # 11405 ML3, 4 MOA, Arms #22M68 Lever Ring, and Cantilever Spacer
Deal # 9 Aimpoint # 11416 ML3, 2 MOA , Arms #22M68 Lever Ring, and Cantilever Spacer
All three models are supplied with Pop Up caps. The New ML3's also include a black outter rubber cover to protect the scope from scratching.
Select Package Below
|
|
|
|
| |
|
Aimpoint Package Deal # 10, 11, and 12
Deal # 10 Aimpoint # 10336 M2, Arms #22M68 Lever Ring, and Cantilever Spacer
Deal # 11 Aimpoint # 11403 M3, 4 MOA, Arms #22M68 Lever Ring, and Cantilever Spacer
Deal # 12 Aimpoint # 11408 M3, 2 MOA , Arms #22M68 Lever Ring, and Cantilever Spacer
All three models are supplied with Pop Up caps. The New M3's also include a black outter rubber cover to protect the scope from scratching.
Select Package Below
|
|
|
|
|
|
