| |
|
S&W K, L and N Frame
Also fits the NEW Smith&Wesson .500 X Frame Smith Wesson scope mount Weaver style- Remove the rear sight and install this versatile Weaver style base, scope mount in just minutes. (most revolvers mfg after 1992 are factory drilled and tapped for this scope mount) Fits K, L, N and X frame revolvers that come drilled and tapped from the factory. Top straps on older S&W revolvers can be easily drilled and tapped for this scope mount. Oversize recoil lug prevents the scope mount from shifting even when shooting full-house, magnum loads. Accepts all Weaver-style rings and accessories. 4-1/2" long, available in black or silver, matte anodized finish, weighs 1.3 ounces. Screws are supplied and are 6-48 thread.
The all new Stainless Steel model (Silver Only) 5.0 ounces
|
|
|
|
| |
|
Smith & Wesson Model 41
Fits the newest generation of this target quality .22 pistol drilled and tapped from the factory and equipped with Millett rear sights. Remove the rear sight and install with screws provided. Accepts all Weaver-style rings and accessories. Includes mounting screws. 4-3/4" long, Black ( ONLY) , matte anodoized finish, weighs 1.7 ounces
|
|
|
|
| |
|
1911 Scope Mount Weaver Style
Fits 1911 Auto and clones, Government length frames. The most rugged, most foolproof scope mount ever designed for the 1911 Auto. Attaches to the dust cover; places the scope forward, over the top of the slide for improved balance and faster sight or red dot alignment. Lightweight, rugged mount won't flex , even when used with major power factor loads. Enhances reliability, does not interfere with ejection. Clearance cut for Colt, Enhanced Slides. Includes installation instructions and Allen mounting screws. Accepts Weaver-style rings. 4-1/2" long, silver and black, matte anodized finish, weighs 2 ounces. Installation of this scope mount requires drilling and tapping of frame.
|
|
|
|
| |
|
Buckmark .22 Caliber Pistol
Buckmark- Lightweight, versatile mount easily converts the Buckmark from open sights to scope sights with no permanent modifications required. Simply remove the factory sight rail and install with the screws provided. Accepts Weaver-style rings and accessories. 6-1/4" black or silver, matte anodized finish, weighs 1.7 ounces.
|
|
|
|
| |
|
Colt Anaconda / Python /King Cobra
Drilled and Tapped- Matches the hole pattern of Anacondas that come drilled and tapped for scope mounts directly from the factory. *Also fits Pythons. Remove the rear sight and install with screws provided. Extra large rear lug fits in the sight recess and prevents scope movement caused by recoil. and tapped. Accepts Weaver-style rings and accessories. 4-1/2" long, silver, matte anodized finish, weighs .1.7 ounces.
|
|
|
|
| |
|
Redhawk/Blackhawk/Super Blackhawk and GP-100
Drill & Tap- Remove the Ruger rear sight and drill and tap the top strap for just two 6-48 screws then install this ultra strong scope mount that will stand up to the magnum revolvers from Ruger. We have an extensive history with this scope mount dating back to 1994. We have sold thousands with rock solid results even on the big bore monsters. Accepts all Weaver style rings and accessories. 4-1/2" long, available in black or silver, matte anodized finish, weighs 1.3 ounces.
|
|
|
|
| |
|
Ruger Super Redhawk Revolver (.44 Magnum ONLY)
Super Redhawk- Tired of the limited application of the Ruger factory rings that came with your Super Redhawk. Now you can change the Ruger mounts to a versatile Weaver-style rail in just minutes and with no permanents alterations to your gun. Lightweight, aluminum rail with steel integral, recoil pins attaches without drilling and tapping. Accepts all Weaver-style rings and accessories. Front and rear factory sights do not require removal. 5" long, silver, matte anodized finish, weighs 2.6 ounces.
|
|
|
|
| |
|
For the 480 Ruger and 454 Casull
Weaver style Scope Mount for the Ruger Super Redhawk in 480 Ruger and 454 Casull. Same as the SRH+ but requires the removal of the rear sight. We use the rear sight notch as the recoil lug, as we do on most of our scope mounts. This mount is a more economical solution to the scope mounting issues on the large caliber's. This is a very attractive solution to the problem. This mount will also fit the .44 Magnum Super Redhawk for your extreme recoil reloads. Black Finish Only
|
|
|
|
| |
|
REDHAWK, Blackhawk Hunter and Bisley Hunter
This scope mount fits the NEW and Older Style Redhawks and Blackhawks with the integral scope ring cuts in the barrel. This is a no drill and tap scope mount for installation on the cuts made by the Ruger factory. Installs in minutes so you can add the scope or dot sight of your choice using Weaver style attaching points.
|
|
|
|
| |
|
RUGER .22 Caliber "NEW MODEL" Single Six
Finally a no drill and tap Weaver style scope mount for the Single Six. This scope mount requires no drilling or tapping of your frame. Handsome, lightweight and durable. Blends beautifully with the lines of the Ruger frame. Accepts all Weaver style rings and accessories. 4-1/2" long, available in black or silver, matte anodized finish, weighs 1.3 ounces. This scope mount attaches to the rear sight elevation adjusting screw hole. You first remove the single six rear sight and replace it with our scope mount. Then insert the supplied screw into the elevation adjusting screw hole and tighten. In the front there is a set screw, that gets adjusted down just until it touches the top strap. All of the testing of this mount was done with .22 Magnum without a single issue. We have sold hundreds of these mounts with tremendous success. Over tightening of the set screw can cause point of impact problems. It will cause the revolver to hit low.
|
|
|
|
| |
|
Ruger MKI, MKII, MKIII, Government Model Competition 22/45
You can pay more money but you can't buy a better stronger scope mount for your MkII MKI 22/45. Lightweight scope rail attaches in just seconds to pistols that are factory drilled and tapped. Provides a "rock steady" base that accepts all Weaver-style rings and accessories. Includes mounting screws which are 6-48 thread. 4-3/4" long, available in silver or black, matte anodoized finish, weighs 1.7 ounces.
|
|
|
|
| |
|
Ruger MkI MkII 22/45 No Gunsmithing
If you have and older MkII that's not drilled and tapped you can install this SCOPEMOUNT without making any permanent alteraitons to your favorite pistol. Remove the rear sight, insert the threaded dovetail filler and install the mount with the screws provided. Accepts all Weaver-style rings and accessories. 5-1/4" long, silver or black, matte anodoized finish, weighs 2.5 ounces.
|
|
|
|
| |
|
TAURUS Large Frame Revolvers M44 / 608 / RAGING BULL 454 CASULL
Drill & Tap- Retrofits medium and large frame revolves with factory adjustable sights. Requires drilling and tapping two, 6-40 holes in top strap. Extra large recoil lug prevents scope movement even on magnum calibers. This mount is for Revolvers manufactured prior to 12/31/00
|
|
|
|
| |
|
RAGING BULL 454 CASULL and .44 Magnum
Redesigned to fit the RAGING BULL 454 CASULL Taurus Scope Mount Weaver style Retrofits medium and large frame Taurus revolvers with factory adjustable sights. *Requires drilling and tapping two, 6-40 holes in top strap. Extra large recoil lug prevents scope movement even on magnum caliber's. Accepts all Weaver style rings and accessories. 4-1/2" long, available in black or silver, matte anodized finish, weighs 1.3 ounces. Screws are 6-40 and are included. NOTICE Taurus has changed the radius on the top strap of the New large frame revolvers. We believe this to have taken place with all guns manufactured starting in 2001. The following mount is for Revolvers manufactured prior to 12/31/00 These revolvers have a 1" top strap radius The following mount is for Revolvers manufactured after 1/1/01 Serial number XUAXXXXXX and up. The first digit is caliber, second digit is year, third digit is month of manufacture UA is January of 2001 These Revolvers have a larger radius top strap.
|
|
|
|
|
|
